Coates Hire will test your electrical equipment for faults every Friday at selected branches, FREE until the end of March.

If your equipment fails the test, we’ll reduce the cost of your hire of a similar product by 50%.

Testing of equipment will be conducted from 7am to 2:30pm each Friday until the end of March 2019 at selected Coates Hire branches (listed below). See below for full Terms & Conditions.

Participating branches include:
Alexandria, NSW
Auburn, NSW
Brookvale, NSW
Camperdown, NSW
Caringbah, NSW
Campbelltown, NSW
Gladesville, NSW
Hillsdale, NSW
Penrith, NSW
Revesby, NSW
Seven Hills, NSW
Willoughby, NSW
Albert Park, SA
Cambridge, Tas
Derwent Park, Tas
Launceston, Tas
Brooklyn, Vic
Bulleen, Vic
Campbellfield, Vic
Dandenong, Vic
Hastings, Vic
Lilydale, Vic
South Oakleigh, Vic
Port Melbourne, Vic
Werribee, Vic
Cannington, WA
Midland, WA
Osborne Park, WA

Terms and Conditions

  1. Testing of equipment will be conducted from 7am to 2:30pm each Friday until the end of March 2019. 2. Testing is only available for 240V electrical equipment which can be carried in a ute or van. All equipment submitted for testing must indicate the Maximum IR Test Voltage. Coates Hire has the absolute discretion to refuse to test any item of equipment where it believes it is unsafe to perform the testing. Testing and tagging of equipment will be conducted by either a licensed electrician or competent person. 3. The 50% cost reduction offer is only redeemable after the item of equipment has been tested and the customer has been advised of the equipment’s failure. The cost reduction is only available on similar products. 4. A customer is only entitled to have a maximum of 5 items of equipment tested during the offer period. 5. Coates Hire is not responsible for loss or damage to any equipment left in its control unless such loss or damage was caused by Coates Hire’s negligence. 6. This offer is only available at selected Coates Hire branches (see www.coateshire.com.au for participating branches). NOTE: Coates Hire will not be held responsible for any damage to the equipment, or for any loss the customer may suffer, which results from insufficient information being provided regarding testing limitations, surge suppressors, filter devices, etc. In these circumstance, further detailed inspection may be required by the relevant OEM. DISCLAIMER: Coates Hire is not responsible for any loss or damage suffered by the Customer (Loss) unless such Loss was the result of the gross negligence or the wilful act of Coates Hire or its employees. To the extent permitted by law, such Loss is capped to $5,000.